The support forum is temporarily read-only. For urgent requests, please email contact[at]psyberia.net
[closed] Wrong numbering nameless waypoints ... or?
[closed] Wrong numbering nameless waypoints ... or?
Wrong numbering nameless waypoints ... or?
Good day! I noticed a bug ... if you create multiple waypoints and sort them by date, it turns a strange wrong numbering. If you assign each point name (from the most to the old to the new in the screenshot), then all right.
Prompt, it is a bug, or it should be?
Good day! I noticed a bug ... if you create multiple waypoints and sort them by date, it turns a strange wrong numbering. If you assign each point name (from the most to the old to the new in the screenshot), then all right.
Prompt, it is a bug, or it should be?
Re: Wrong numbering nameless waypoints ... or?
Tried All-In-One Offline Maps app, the same problem there. While on the other phone, everything is fine, no problem. Tried different versions, does not help. What's the problem could be?
Re: Wrong numbering nameless waypoints ... or?
It seems incorrect numbering somehow coincides with sorting "Distace from screen center", if the center is set to the last point.
-
- Site Admin
- Posts: 6407
- Joined: Wed Apr 14, 2010 9:41 pm
Re: Wrong numbering nameless waypoints ... or?
Hi and sorry for the delay.
As far as I understand your report, this is the intended behavior (not a bug).
When a point has no name, the application will randomly assign it a number "X" and call it "Waypoint X" in the placemarks list (but simply "Waypoint" on the map, this number has no sense here).
This number is not related and do not depends on the current sorting. I will remain the same if you change the sort type, however it can change if you add more points in the same folder.
In your first screenshot, you marked the top/left most point has been "1". Based on what? Apparently the app decided it's not "1" but "Waypoint 2".
It's listed first because you've chosen the ascending date sorting, we can deduce it's the first one you created.
Let me know if something is not clear.
As far as I understand your report, this is the intended behavior (not a bug).
When a point has no name, the application will randomly assign it a number "X" and call it "Waypoint X" in the placemarks list (but simply "Waypoint" on the map, this number has no sense here).
This number is not related and do not depends on the current sorting. I will remain the same if you change the sort type, however it can change if you add more points in the same folder.
In your first screenshot, you marked the top/left most point has been "1". Based on what? Apparently the app decided it's not "1" but "Waypoint 2".
It's listed first because you've chosen the ascending date sorting, we can deduce it's the first one you created.
Let me know if something is not clear.
Do you like AlpineQuest ? Leave a small comment on Google Play !
Re: Wrong numbering nameless waypoints ... or?
Sorry, I did not know that the program randomly assigns numbers. Yes, that's right, the numbers change if more point to add.
Is it possible to make the rooms were out of order?
Or add a setting to "user_settings.conf" file to automatically assign a name to create points, with variable, where "N +" - it is the cumulative number of the order and "yyyy-MM-dd_HH-mm-ss" - this is the date the waypoint was created as to set up "core.pictures.format", and the rest - the user name.
For example, in "user_settings.conf" Add setting "Forest N +" and points will names "Forest 1", "Forest 2", "Forest 3", and so on.
Maybe you think of a more competent implementation.
The rest of the program is super, so to speak, and bought a kiss!
Is it possible to make the rooms were out of order?
Or add a setting to "user_settings.conf" file to automatically assign a name to create points, with variable, where "N +" - it is the cumulative number of the order and "yyyy-MM-dd_HH-mm-ss" - this is the date the waypoint was created as to set up "core.pictures.format", and the rest - the user name.
For example, in "user_settings.conf" Add setting "Forest N +" and points will names "Forest 1", "Forest 2", "Forest 3", and so on.
Maybe you think of a more competent implementation.
The rest of the program is super, so to speak, and bought a kiss!
-
- Site Admin
- Posts: 6407
- Joined: Wed Apr 14, 2010 9:41 pm
Re: Wrong numbering nameless waypoints ... or?
Sorry for the delay,
I plan to add predefined waypoints, ie you'll be to pre-fill some fields (icons, name, etc.) and add them directly on the map.
I'll take care to add the ability to add a counter.
Note that you can already do this for existing points:
- Open the placemarks explorer and select multiple points (using multiple selection);
- Select "Edit details" for all the category;
- Fill the name "Forest %i", then Ok.
Points will be names "Forest 1", "Forest 2", etc
I plan to add predefined waypoints, ie you'll be to pre-fill some fields (icons, name, etc.) and add them directly on the map.
I'll take care to add the ability to add a counter.
Note that you can already do this for existing points:
- Open the placemarks explorer and select multiple points (using multiple selection);
- Select "Edit details" for all the category;
- Fill the name "Forest %i", then Ok.
Points will be names "Forest 1", "Forest 2", etc
Do you like AlpineQuest ? Leave a small comment on Google Play !
Re: Wrong numbering nameless waypoints ... or?
Thank you for the answer! I will try!
It is very happy to hear that your favorite Navigator is getting better!!! Thanks!
It is very happy to hear that your favorite Navigator is getting better!!! Thanks!
Re: [closed] Wrong numbering nameless waypoints ... or?
Hi
There are renaming masks in the application.
1.
%i
2.
%n
Mask 1 is more or less understandable.
What does mask 2 do? Well, maybe you can give some examples of how to use.
There are renaming masks in the application.
1.
%i
2.
%n
Mask 1 is more or less understandable.
What does mask 2 do? Well, maybe you can give some examples of how to use.
-
- Site Admin
- Posts: 6407
- Joined: Wed Apr 14, 2010 9:41 pm
Re: [closed] Wrong numbering nameless waypoints ... or?
%i will be replaced by the index of each item in the list (will go from 1 to number of items)
%n will be replaced by the total number of items in the list.
%n will be replaced by the total number of items in the list.
Do you like AlpineQuest ? Leave a small comment on Google Play !
Re: [closed] Wrong numbering nameless waypoints ... or?
What is the practical use of this mask?%n will be replaced by the total number of items in the list.
I have applied it and got several waypoints with the same name. For example, I have 4 waypoints and I have:
Waypoint4
Waypoint4
Waypoint4
Waypoint4
Perhaps there is something I don't understand or misunderstand?
François, can you give some practical examples?
Also...
Do I understand right that the masks can be alternated?
N.B.
I am a fairly technically advanced user, but I didn't understand how to use these masks at first. So what happens to those users who are somewhat less technical than the advanced users?
It might make sense to either expand the prompt (in blue letters), or add something like name before %i or %n?
In appropriate languages, of course.
Last edited by alexlong on Wed Nov 30, 2022 12:13 pm, edited 1 time in total.
Re: [closed] Wrong numbering nameless waypoints ... or?
One more comment
It seems to me that the mask-based renaming process works a little incorrectly.
Here's an example.
I have placed 4 waypoints on the map one by one, 01,02, 03, 04.
I have the "sort by date in reverse order" mode set in the Placemark explorer, it's comfortable for me because I can see the most recent waypoints at the top of the list.
Then I select all these 4 waypoints
I rename them by mask:
00%i
I get waypoints 001, 002, 003, 004.
BUT!
They do not correspond to the original waypoints.
Look at the most recent screenshot. The waypoints are lined up backwards on the map. The original waypoint 01 is now referred to as 004.
My wish was to rename the waypoints so that 01 turns into 001 accordingly.
I understand that if the sorting was Name (a-z) or something like that, there probably wouldn't be such a problem. But it doesn't always work that way. Or I'd have to rearrange the sorting method every time, and I don't forget about it. If I forget, it could be fraught with problems.
Imagine that I don't have 4 test waypoints on the screen, but 204 waypoints that I put one by one, following the route at a race, for example. I rename them and further confusion occurs.
It seems to me that the mask-based renaming process works a little incorrectly.
Here's an example.
I have placed 4 waypoints on the map one by one, 01,02, 03, 04.
I have the "sort by date in reverse order" mode set in the Placemark explorer, it's comfortable for me because I can see the most recent waypoints at the top of the list.
Then I select all these 4 waypoints
I rename them by mask:
00%i
I get waypoints 001, 002, 003, 004.
BUT!
They do not correspond to the original waypoints.
Look at the most recent screenshot. The waypoints are lined up backwards on the map. The original waypoint 01 is now referred to as 004.
My wish was to rename the waypoints so that 01 turns into 001 accordingly.
I understand that if the sorting was Name (a-z) or something like that, there probably wouldn't be such a problem. But it doesn't always work that way. Or I'd have to rearrange the sorting method every time, and I don't forget about it. If I forget, it could be fraught with problems.
Imagine that I don't have 4 test waypoints on the screen, but 204 waypoints that I put one by one, following the route at a race, for example. I rename them and further confusion occurs.
-
- Site Admin
- Posts: 6407
- Joined: Wed Apr 14, 2010 9:41 pm
Re: [closed] Wrong numbering nameless waypoints ... or?
Hi Alex,
For the %n, for example it can be used like this: "Waypoint %i of %n". They will be renamed "Waypoint 1 of 50", "Waypoint 2 of 50", etc.
I'll see if I can add a link for more help somewhere.
For the order of waypoints, yes you have to be careful to first display by name if you want to keep the same order after renaming.
I think it's important that when you rename the waypoints, the order is the one currently displayed in the list.
This way, can can rename your waypoints based on any ordering you want, not only the original order.
For the %n, for example it can be used like this: "Waypoint %i of %n". They will be renamed "Waypoint 1 of 50", "Waypoint 2 of 50", etc.
I'll see if I can add a link for more help somewhere.
For the order of waypoints, yes you have to be careful to first display by name if you want to keep the same order after renaming.
I think it's important that when you rename the waypoints, the order is the one currently displayed in the list.
This way, can can rename your waypoints based on any ordering you want, not only the original order.
Do you like AlpineQuest ? Leave a small comment on Google Play !
Re: [closed] Wrong numbering nameless waypoints ... or?
If I want to see the numbering as 01 or 001, which mask should I use?%i will be replaced by the index of each item in the list (will go from 1 to number of items)
For example, I have 55 waypoints in a folder. I want to rename them all so that they look like 001 of 55, 002 of 55, and so on.
What should the mask be?
%iii of %n
There is a hint in the applicationx
%i → 1.7
%n → 7
Can I see (at least here) a description of what this means? Let's imagine that I don't know anything about that at all, and I don't understand the meaning of these numbers.
-
- Site Admin
- Posts: 6407
- Joined: Wed Apr 14, 2010 9:41 pm
Re: [closed] Wrong numbering nameless waypoints ... or?
Hi Alex,
No sorry right now it's not possible. You can only do 1 of 55, 2 of 55, etc.
Edit: I've added this ability, it will be in the next update
No sorry right now it's not possible. You can only do 1 of 55, 2 of 55, etc.
Edit: I've added this ability, it will be in the next update
Do you like AlpineQuest ? Leave a small comment on Google Play !
Re: [closed] Wrong numbering nameless waypoints ... or?
Hi François,
Never understood the numbering.
Now with something new coming up next update an explanation/pointer in the manual how to work with them would be appreciated.
As allways
Friendly greetings
Jos
Never understood the numbering.
Now with something new coming up next update an explanation/pointer in the manual how to work with them would be appreciated.
As allways
Friendly greetings
Jos