AlpineQuest & OfflineMaps

Can you show distance from route start to waypoint?

Hi,
On a displayed track on the map, you can click on any location, select "Details" and you get various stats (including distance) from this point to the end and to the start from this point.
Please be ore precise if this is not what you're asking for.
Best regards

For example in the green track if I click on waypoint 33 there's no info (in details) about distance to start point through the green route, not directly with a straight line. But that means that the start point it's the 1st point. So if I'm coming back then the start point should be the last waypoint. So i think that there should be an option to set the finish or start in both extreme waypoints



I only can get the track length (in details)

Hi again,
Thanks for the clarification.
In order to get this information for your route you've to use the "follow route" feature. On the map, click the route, select the route name and select "Follow route".
You'll be able to indicate the order of the map (by changing the "reverse order" option).
Then move the map center to a location, and click on the "Details" button at bottom right. This is button (3) on the online help.
Let me know

I tried follow route before but no side panel was displayed so I forgot it. Now I know what's it for, but it works with the gps, and my tablet doesn't have gps.

Just as an update this can be done even if the device doesn't have a GPS, you just won't have notification or ETA estimation.

Hi
or make future area information always shown on the map?