[done] Geolocation screen button dissables GPS when closed

[twoten]

The button/slider at the top left of the screen for accessing the GPS control turns the GPS on when open and turns it off when closed.

I would have assumed closing should only clear the screen not turn the GPS off again.

Is this correct?

Keith.

[ukuest]

I would like to second this.

Closing the GPS tab/slider should be possible without turning GPS off, so that the map can be seen full screen while GPS is on.

[Psyberia-Support]

Hi,
Yes when you close the GPS tab the geolocation is stopped. Same thing happens for the compass.
I found it usefull to be able to turn on/off the GPS like that instead of openning the geolocation dialog and selecting Activate/Deactivate.
One thing is sure is that a confirmation should be asked before turning off the GPS if a track is beeing recorded (as ukuest requested) and before exiting the app.
Do you think that a parameter in the settings like 'Do not turn off geolocation automatically' that activates your behavior in the settings would be good?

[twoten]

Do you think that a parameter in the settings like 'Do not turn off geolocation automatically' that activates your behavior in the settings would be good?

This could be a good idea.

I think if the user is tracking a route then the GPS should remain active regardless what the user is doing, if the GPS slider is in or out or if the user is using another program on the phone. It might be useful to have a button in the menu to exit AlpineQuest which stops it running in the background, if this is selected then a dialogue box should appear with a warning and give an option to continue or cancel if the user continues then the tracking saved and GPS is stopped.

[ukuest]

Yes, a setting would be a good idea.
I fully agree with twoten's comments.

I do not normally want to switch off GPS at all: when I have AlpineQuest running, then I am usually recording my track anyway.

Only reason for me to stop geolocation was when I wanted to stop position locking so that I could move the map, and the way it currently works stopping GPS was quicker than turning off position locking.

But if you could change position locking so that it is temporarily disabled while I move the map with my finger, and only snaps back to position after I have stopped moving the map for a few seconds - then I would not even have the need to turn off position locking. And then I would have no need at all for the GPS dialogue in normal operation and could keep it closed all the time!

[twoten]

But if you could change position locking so that it is temporarily disabled while I move the map with my finger, and only snaps back to position after I have stopped moving the map for a few seconds - then I would not even have the need to turn off position locking. And then I would have no need at all for the GPS dialogue in normal operation and could keep it closed all the time!

Good idea, maybe disable the position lock while the user is scrolling the map plus a few seconds which gives the user time to check a route ahead.

[bastien]

Do you think that a parameter in the settings like 'Do not turn off geolocation automatically' that activates your behavior in the settings would be good?

Yes good idea if we can configure that in the settings. We need to activate or desactivate this option if necessary.

Good idea, maybe disable the position lock while the user is scrolling the map plus a few seconds which gives the user time to check a route ahead.

This idea seems to be good too.

[Psyberia-Support]

Hi,
The option has been added in the settings.
Thanks for your feedbacks.
Cam