[fixed] No data plotted in chart profile - 1.4.6

[rac]

Hi,

In "Track details" workspace I have no data plotted in chart profile (an empty graph).
The some behavior if observed when I touch for details in chart.

Thanks
Rac

[CRider]

Hi,
I think I had the same issue.
In the detailed chart, I selected the x and y axis to display something (e.g. distance and altitude) and then everything works again. This may be caused by the fact that the chart settings are now saved for the tracker and there was no initial settings.
Regards.

[rac]

Hi,

Thanks for the tip. I'll try that, while we wait for a fix.

Rac

[Psyberia-Support]

Hi and thanks for the report,
The graph should be initialized with the same default values as before, so it should not be any differences (at least I hope).
When there are only few locations (at the beginning of the tracking, with not enough data to compute meaningful stats), the graph is sometimes empty until more locations are retrieved.
If it did happen with a large amount of data, then it's a bug, please let me know so I can have a look.

[rac]

Hi,

Yes, the graph remains empty during all the track recording.

Rac

[Psyberia-Support]

Ok I'll have a look at that.

[cjreston]

Hi
I have the same problem - I cn't see where to set the X Y values to display

[CRider]

Hi,
For the tip/workaround :
- tap on the chart to have it displayed in full screen
- tap on the sides / borders (left/right for Y axis - bottom for X axis) to select something to display on the chart (e.g altitude and distance).
This has fixed the problem for me.
Best regards.

[CRider]

Hi,
Well, the workaround fixes the issue only temporarily. After several relaunch of the app, the chart is again empty. It's a bit annoying to perform again and again the workaround.
Regards.

[Psyberia-Support]

Until the last update there is nothing that I can do.
However, as far as I have understand the issue, it's only happening if you click on an empty graphic, before having enough location to plot the track. So if you wait for few locations to be recorded, you won't have to set the axis again.

[fortion]

having the same issue....any updates....?

[CRider]

Hi,

Until the last update there is nothing that I can do.

Sure! I just wanted to give you as much information as possible.

However, as far as I have understand the issue, it's only happening if you click on an empty graphic, before having enough location to plot the track. So if you wait for few locations to be recorded, you won't have to set the axis again.

You're right. I thought that I had the issue again like before I found the workaround.
So the workaround is still relevant until a new release of AQ.
Best regards.

[Psyberia-Support]

Version 1.4.7 has been released with a fix for this issue.
Sorry for the disagreements
Best regards