Esri shapefile conversion

[helwin]

I watched all tutorials, so now I am a QGIS master , converted contours to mbtiles like you suggested.

Fact is, zoom scales in QGIS do not match in Alpinequest.

E.g. when I specify Zoom 16 to 17 in QGIS, in Alpinequest it´s (1) to 15.

QGIS 16 to 18 turns out until 17 in Alpinequest, 16 to 19 until 19.

Screenshot taken at Zoom level 9, mind that in QGIS I specified 16-19:

Screenshot_20210426-193848_AlpineQuest Off-Road Explorer_resized.jpg

(85.33 KiB) Not downloaded yet

from Level 10 to end:

Screenshot_20210426-193917_AlpineQuest Off-Road Explorer_resized.jpg

(89.51 KiB) Not downloaded yet

Any ideas?

[Psyberia-Support]

What is displayed in AlpineQuest is the level of details number of the main map, starting from 1. If you have a map with 3 distincts levels of details, they will be numbered as 1/3, then 2/3 and 3/3.
Now if you want to also display the equivalent OSM zoom ID (which the MBTile format also follows), you can use this user setting:

Code: Select all

map.canvas.display_osm_zoom_id=true

But all formats have their own scales, not necessarily bound to how OSM compute their zoom levels.

[helwin]

Thanx for the Info.

The level offset is not that big of a problem once you know about it, what is annoying is the fact that these .mbtiles are displayed on levels not sspecified in QGIS, so they look like a solid block (first screenshot).

Do you think that this is a bug in QGIS or a problem in Alpinequest?

[Psyberia-Support]

I don't think there is any problem, it's just that you're not comparing the same levels, the numbers does not refer to the same things.
The only thing you can compare is the scale value, ie "1:219,000" and so on.

And when you see the map displayed as a blue area (first screenshot), it means that you have a map displayed that covers this area but the zoom scale is too different to be displayable at the current scale, so you need to zoom in.

[helwin]

And when you see the map displayed as a blue area (first screenshot), it means that you have a map displayed that covers this area but the zoom scale is too different to be displayable at the current scale, so you need to zoom in.

Ok so this is the intended behavior

I don't think there is any problem, it's just that you're not comparing the same levels, the numbers does not refer to the same things.
The only thing you can compare is the scale value, ie "1:219,000" and so on.

So do you know of a workaround? Because QGIS only lets me choose by zoom level, not by scale value when converting to mbtiles....All I want is these contours to kick in around , let´s say 1: 15 000 and less, and above nothing should be visible at all, also no blue area of course....

[Psyberia-Support]

Add the user setting I gave you above, and AQ will also display the zoom level number used by QGIS.
Otherwise you can use this table to get the scale of each zoom level number: https://wiki.openstreetmap.org/wiki/Zoom_levels

[helwin]

Still the same as before with this setting. I will try more options and report again. Thank you for your great support so far!

[hamish]

Would it be possible to have a user setting to turn off the blue overlay - so if a map layer isn't displayable at a particular zoom level you can carry on using the layers that will display uninterrupted.

[Psyberia-Support]

Concerning the user setting to display the QGIS zoom levels, please double check you've correctly written it and restarted the app.
It should appear like this:


Concerning the blue area, I can add an user setting to disable it in the next update.

[helwin]

Yes, it looks like this. Map starts at 1/15 (3) and goes up to15/15 (23). Blue area until 9/15(13), contours displayed from 10/15(14) to 15/15(23).

Mbtiles conversion was specified from zoom level 16 to 19 in QGIS.

[Psyberia-Support]

Yes it seems coherent.
Your contours layers zoom levels go from 16 to 19, but the application will underscale the first level and overscale the last one a little bit, so it's effectively displayed from 14 to 23.

[helwin]

Ah....ok!

Works fine now with setting zoom levels just from 17 to 18. Waiting for the update to lose that blue area! Thanks a lot!

[helwin]

Your contours layers zoom levels go from 16 to 19, but the application will underscale the first level and overscale the last one a little bit, so it's effectively displayed from 14 to 23.

Is it possible to add a user setting to avoid this over/underscaling? I want to display also the 5 meter contours, I am planning to display these only at the last zoom level but it´s not usable with this kind of overlap.

[Psyberia-Support]

You can use those user settings to set how many levels to under or over scale. Those settings only apply to file based maps.
By default it's:

Code: Select all

maps.features.offlinemaps.underscaling_levels=2
maps.features.offlinemaps.overscaling_levels=4

This should disable under and over scaling:

Code: Select all

maps.features.offlinemaps.underscaling_levels=0
maps.features.offlinemaps.overscaling_levels=0

For calibrated images, those values are multiplied by 3.

[helwin]

There seems to be a problem, this seems to override the "map.canvas.display_osm_zoom_id=true" setting. Can you check?